There’s No Hot Water! What Should You Do?

No matter what type of water heating system you have, if there's no hot water, it's time to start troubleshooting. Learn the possible causes here.

Water is vital to our overall well-being. So why is it that, sometimes, there’s no hot water? And what does that mean for you?

Be glad that you’ve found your way here as we go over all of this and more in this article. Find out what you should do if you are suffering from water deprivation!

Check the Circuit Breaker

It may be the case that a circuit has tripped, and the power supply to your water heater may have been switched off. If this is the case, locate the circuit breaker box and locate the switch for the water heater and ensure it is turned on.

If the switch is on, try resetting the circuit breaker by turning it off and back on again. Also, you can check out this link if you want to discover the pros and cons of renting vs owning water heaters.

Look For Leaking Water Around Your Tank

Look for leaking water around the tank and underneath it. If you find any water, you may want to check for cracks, rust, or other signs of damage. Make sure to switch off the main water supply before you begin to investigate and repair any damage.

Once you have identified and taken care of the issue, it’s important to test the hot water again to make sure it is working properly. If there are still issues, you may need to call in a professional again to ensure the job is done properly.

Reset Your Water Heater

A water heater reset is a simple process that requires you to press a button or flip a switch. Generally, there should be a red reset button on the exterior of the water heater. If pressed, it will stop the current flow of electricity to the device, allowing it to cool down and reset itself.

In some cases, the heater can be turned on manually via the thermostat switch. If the basic reset doesn’t bring back hot water, it may require more experienced attention and other possible solutions.

Check for Water in the Compartments

If there is no water, it could be due to a broken pipe. If the pipe is broken, it is important to shut off the water valve and contact a plumber or water specialist as soon as possible for water heater troubleshooting.

If the pipe isn’t broken, then there may be another issue. Check to see if the thermostat on the water heater is adjusted properly or if the pilot light is lit.

Check the Pilot Light

If the hot water is gone in your home and you’ve checked the tank and all the faucets and the problem persists, it’s time to check the pilot light. The pilot light is a small flame that is lit continuously to supply heat for the gas water heater. If the pilot light has gone out, you will need to relight it in order to get the hot water flowing again.

Once the pilot flame is lit, reattach the shield and turn on the gas valve. Make sure to test the water before using it.

No Hot Water? Troubleshoot Now

When there’s no hot water, don’t panic. You should try to identify why you don’t have hot water, then troubleshoot the issue. Do your best to identify the source and take steps to solve the issue quickly!

Did you find this article helpful? Check out more of our blogs!

Recommended Articles

Leave a Reply